Root step by step Manual i8190 (N,L,T,I) Galaxy S3 Mini

How to Root I8190 / I8190N / I8190L / I8190T Galaxy S3 Mini -
STEP BY STEP rooting manual for GSM-Hosting users

I have some good news today.
Official recovery files from CWD i found.

What we have?
Simple, now we hav easy and fast way for root any I8190 L, I, T, N Galaxy S3 Mini.
Just Follow Manual now.



1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download recovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip recovery image from here ------> Click HERE!
- Download SuperSu Last version ----> Click HERE


2. Step

- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.


3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract ecovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip !Select PDA and browse to where you have extracted ecovery-clockwork-touch-6.0.2.7-golden.tar.md5
and select it


4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.


5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- Select Install zip from sdcard --->choose zip from sdcard ---> scroll to and open folder where located UPDATE-SuperSU-v1.05.zip-> choise UPDATE-SuperSU-v1.05.zip->
comfirm - YES - Install Update UPDATE-SuperSU-v1.05.zip.


Done ! And you are ready to go

thanks goes to chotu.


You can also use old method for root i8190 - prerooted firmware.
After few days i will update thread and will add link for prerooted Firmware.
i8190 prerooted - will be HERE.
i8190 prerooted - will be HERE.

Root step by step Manual i9082 (L) Galaxy GRAND

How to Root I9082 / I9082L -
STEP BY STEP rooting manual for GSM-Hosting users

Just follow this simple steps:



1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download i8092 recovery image prerooted ----> Click HERE
- Download SuperSu Last version ----> Click HERE


2. Step

- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.


3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract CWM-touch_i9082_chotu.tar.zip !Select PDA and browse to where you have extracted CWM-touch_i9082_chotu.tar.md5
and select it


4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.


5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- SelectInstall zip from sdcard --->choose zip from sdcard ---> scroll down and select Fix Recovery.zip and
again choose zip from sdcard and flash UPDATE-SuperSU-v1.05.zip


Done ! And you are ready to go

thanks goes to chotu.

Latest version SAMSUNG USB Drivers for Mobile Phones

Tired downloading/installing KIES only for last drivers?
SO this thread for you



Download and Install Samsung's latest USB drivers & ADB Interface: February 2013!


SAMSUNG USB Drivers for Mobile Phones (x86 & x64) v1.5.18.0 ===> Click HERE

Step by step installation manual:
- Uninstall previous version from control panel and reboot pc
- Install new Drivers and again reboot pc
- Turn ON “USB debugging” mode on your Android device
- Connect you phone and enjoy



Here Samsung Android ADB interface Drivers from MS:
DOWNLOAD Driver v2.9.507.0 ===> Click HERE
__________________

Samsung i9300 Copy China Hard Reset Done!!

Samsung i9300 Copy China Hard Reset Done!!

Method
============
Volume Down + Power





Install Bangla Font on Any Android Devices

Install Bangla Font on Any Android Devices


Most Bangali User wants Bengali language support for their Android Samartphone.

Here is an app that can install bangla font in any android devices


Download Bangla font

Installation : (For Samsung Only )
  • Download the file in your PC and transfer to Phone
  • Open the downloaded file by tapping, in your device and Install
  • Go to Settings > Display > Font style and Select BanglaFont, tap OK then tap “Restart now”.


Installation : (For Other Android )

Just install and forget . Its done for you .

Now How to write bangla in Any android ?

First install this font to your phone its impotent because without it you wont be able to read bangla in Android Market and then download any keyboard from below & Install it.



Another Method For install bangla font in your android devices...

1.Download solaimanlipi2.0.ttf(new version) font. Rename it to DroidSansFallback.ttf
2. Go to your device's system>fonts> folder and replace the "DroidSAnsFallback.ttf" font with yours. Use file manager that can access you root folders such as: root explorer or file manager HD
3. Restart your device and it should be rendered with native bangla support.

DOWNLOAD Solaimanlipi Font

Enjoy...

NOTE:Many android of symphony and walton has bangla support .. thats mean you can read bangla without installing any font ... like w60 .. but if your android fails to do so then use the flowing application to make it works.

Volcano box tested work (windows 8) guide install here

Volcano box work windows 8 guide install here
















MY TESTED DRIVER HERE: Profilic_Win8_x64_x86

Karbon K18 MT625A only usb Red/Formet/imi Write Done Only Mircale Box

Karbon K18 MT625A only usb
(blinkingProb Solve)
Done By Mircale Box




Read Flash



Format


Imei Repair

ORT JTAG- New Model : Samsung SGH-T769 Repair Dead Boot " Full Supported "

ORT - JTAG UPDATE
[27 September 2013]

Description :
  • Samsung SGH-T769 Repair Boot Supported
Release Notes and Files:
  • Samsung_SGH_T769.dll
    • Repair Dead Boot
Repairing Samsung SGH-T769
  • Connect Battery and USB Cable
  • Download DLL File "Samsung_SGH_T769.dll"
  • Place in phones folder
  • Select Model
  • Click Repair
ORT Team News and Blog :
ORT-JTAG - The Real JTAG'gers

Samsung N7100 Galaxy Note II - Discussion Thread - Last Official firmware

Samsung Galaxy Note II



The Samsung Galaxy Note II is an Android smartphone manufactured by Samsung and noted for its combination of a large display, 5.55-inch (141 mm) measured diagonally, and software optimized for an integral self-storing stylus. Because the display places the device at the large end of the smartphone and small end of the tablet size ranges, the Galaxy Note II has been called a hybrid of a phone and tablet, or phablet.
Succeeding the Samsung Galaxy Note, the Note II features a 1.6 GHz quad-core processor, 720p resolution display, 2 GB of RAM, and storage capacity up to 128 GB — when using a 64 GB microSD card with the projected 64 GB model.
At the time of its launch, the Galaxy Note II was the first Samsung phone to employ Android 4.1 Jelly Bean as its standard operating system.

Feature and Configuration




N7100XXDMB2_VFG - XX personalization Italy

Samfiles

Samsung Galaxy Note II (GT-N7100) –User Manual/Guide
Samsung Galaxy Note II (GT-N7100) –User Manual/Guide

Samsung Galaxy Note II Repair Manual
Samsung Galaxy Note 10.1 Repair Manual - iFixit

Galaxy Note 2 - N7100 Complete Disassembly & Assembly
http://www.youtube.com/watch?v=UT-2zrZ_aNo
__________________

Android Tablet-WIFI(CPU A10 - A13)WIPE ROM EASY III-Solved Hang & Google Password-III

Android Tablet (CPU A10 - A13)WIPE ROM EASY

III-Solved Hang & Google Password--III

100% Tested By Me
Related Software Problem Solved






DownLoad : WIPE ROM EASY A10 - A13.rar By azimbahar ..::One-Man::..

Wipe Rom = Wipe Data and Wipe Cache = Factory Reset = Data Lose




Supported - Wipe Rom CPU A10 - A13
Example - Just Flowing The Image .






How To Wipe CPU A10 - A13

III---Gide---III

PolarBox Update v334 Ready

New Lock Screen Bug Found in iOS 7.0.2 [Video]

The video below, posted to YouTube by Dany Lisianski, shows a method of accessing contacts, photos, send message, and send email by making a FaceTime call.

*Note: Disabling Siri on the launch screen will prevent this.

Steps to reproduce:
1. Make a phone call (with Siri / Voice Control).
2. Click the FaceTime button.
3. When the FaceTime App appears, click the Sleep button.
4. Unlock the iPhone.
5. Answer and End the FaceTime call at the other end.
6. Wait a few seconds.
7. Done. You are now in the phone app

http://www.youtube.com/watch?v=fVpfdYYy1Dg

Miracle Eagle-Eye Update Ver 1.59 Discussion Thread(28-Sep-2013)

Samsung C5010 Successfully Flashed With UFS

here is the flashing log

Loaded Settings from: Sams.ini
Partition Table: C5010DDJE5.ptt
Regions : India
Language: en(bn,gu,hi,kn,mr,ms,pa,ta,te)
Release : 2010 May Rev: 5
PROD_ID: A61312ADFF402210
SCROM_V: PNX6712 V.04.06
CHIPSET: 3622
FL_VERS: 7.2.4
FL_CHIP: Samsung K9F1G08Q0M [NAND 1G]
NAND Read Done, 131072 byte(s), Time: 00:02
BOOT Ok, 921600 Baud
Partition IMAGE Erase Done, 6 block(s), Time: 00:00
Partition LCDACT Erase Done, 1 block(s), Time: 00:00
Partition MAIN Erase Done, 136 block(s), Time: 00:00
Partition PAGED Erase Done, 88 block(s), Time: 00:00
Partition LFS Erase Done, 8 block(s), Time: 00:00
Partition a Erase Done, 200 block(s), Time: 00:00
Partition b Erase Done, 96 block(s), Time: 00:00
Partition c Erase Done, 344 block(s), Time: 00:00
Partition d Erase Done, 80 block(s), Time: 00:00
Partition sysv File not Exists, Skipped
Partition sysv_bk File not Exists, Skipped
Partition IMAGE Write Done, 8192 bytes(s), Time: 00:00
Partition LCDACT Write Done, 11948 bytes(s), Time: 00:00
Partition MAIN Write Done, 13412352 bytes(s), Time: 03:56
Partition PAGED Write Done, 4456848 bytes(s), Time: 01:21
Partition LFS Write Done, 6540 bytes(s), Time: 00:00
Partition a Write Done, 22765248 bytes(s), Time: 06:36
Partition b Write Done, 5922048 bytes(s), Time: 01:42
Partition c Write Done, 5824896 bytes(s), Time: 01:41
Partition d Write Done, 145728 bytes(s), Time: 00:02
Partition sysv File not Exists, Skipped
Partition sysv_bk File not Exists, Skipped
Partition BOOTNAND Write Done, 131072 bytes(s), Time: 00:02
PROD_ID: A61312ADFF402210
SCROM_V: PNX6712 V.04.06
CHIPSET: 3622
FL_VERS: 7.2.4
FL_CHIP: Samsung K9F1G08Q0M [NAND 1G]
Firmware Signed Ok

Micromax C111 QSC6010 Flasher And Flash File With Download Guide

Steps to download the software:

1. Double click on the tool name is ‘C118 MultiDL V1.0’ then press start, after
complete the process press ‘OK’ button.


2. Now you can the new file name ‘C118 MultiDL V1.0.exe’ in a new page, please
double click on the same then you will see the below image.


3. Browse the software through menu File-> Open download file, Select software
file.

4. Now Go to menu option->Paramset-> press on button ‘administrator’ and enter
the value “3000” as password.


5. Select/click on the box name ‘Download all Erase EFS’ then press button ‘OK’


6. Now finally clicked on ‘Downward yellow arrow’ button for start to download
the software.


Note:- If Set Blink Condition Than Press 1 + 3 Than Insert USB
Process same as above

Download Flasher And Flash File Here
Flasher & Driver

Flash File

C111 QSC1100 Flasher And Flash File With Download Guide

Note:- Flash Process Is same Like Micromax C100

Flasher

Flash file

Driver

All Gsm Solution Headline Animator

Followers