Plasma Tool v.1.0.2.2 released Exclusive

Plasma Tool v.1.0.2.2 released. Exclusive.

What this tool can do:

- Unlock all Sony Xperia 2010 Year (under test, private only)
- Unlock all Sony Xperia 2011 Year( with Test Point) (under test, private only)
- Flash All Sony Xperia/ Sony Mobile Android based mobile phones
- First in the World: Read Trim Area from Running OS via ADB( Android Debug Brigde, ADB - included)
- First in the World: Write Trim Area from Running OS via ADB (Android Debug Bridge, ADB - included)*
- Trim Area Backup Read using ADB/BootLoader(for test or Security reason)*
- Trim Area Backup Write using ADB/Bootloader**
- Single Trim Area element Read/Write*


* Not all TA elements can be written or read and not all Platforms support it.
** Not all TA elements can be written or read.

!!!Software require Internet Connection for all operations!!!






download tool

Usage:
!!!IMPORTANT!!! Before any operation with any new phone - Back it UP! Later
you can restore it if somethings gone wrong.


A) To read/write Trim Area
using ADB:
1. Connect your phone to PC using USB Cable.
2. Enable USB-Debugging in Settings->Development menu
3. Install drivers
4. Go to TA work tab, click ADB in the software and press Connect.
If you need to Cancel you can click cancel to stop operation
5. Wait software to check root in your phone and try to root it.
6. If your phone is not rooted you recieve a message how to rootyour phone.
7. Click Backup TA. All your TA will be backed up and saved in new
folder, same as your imei number
8. If you need to restore phone - click Write TA from Backup
9. If you need to read/write single element: enter element number in
heximal (for example 7da) and press read/write
9a. Upon write operation you will be asked to open the file to
write, so please be ready for this file to open.

using BootLoader:
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install drivers (x64 or x86)
3. Check if driver install ok
4. Disconnect phone
5. Go to TA Work tab and click Bootloader
6. Click Connect button. If you need to cancel you can click cancel
to stop operation
7. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
8. After successfull connect Click Backup TA (for your security)
9. If you need to restore click Write TA from Backup
10. If you need to read/write single element: enter element number
in heximal (for example 7da) and press read/write
10a. Upon write operation you will be asked to open the file to
write, so please be ready for this file to open.

B) To flash a S1_Boot android phone
1. Go to Flasher tab
2. Follow the procedure 1 of the read/write TA using BootLoader
(Traning)
3. Click Open firmware (acceptable formats: zipped firmware bundle,
with loader.sin inside), file format - zip or 7z (7-zip)
4. Select files to flash(eg. 1 file or All files)
5. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
6. Install Drivers (x64 or x86 - according your system OS)
7. Stand by, software detect phone and send the loader.sin from the
archive
8. Click Flash when phone is connected and software hint says "You
can press the Flash button now"
8a. Keep in mind, the system.sin takes longer at 99%, this is ok,need wait.

C) To unlock phone
without Test Point (2010 phones only):
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install Drivers (x64 or x86 - according your system OS)
3. Check if driver install ok
4. Disconnect phone
5. Enter your user id and password
6. Click unlock
7. Connect phone in Flash mode (Hold the back (or the Volume down in
new 2012+ phones)) key and connect the USB cable.
8. Follow the on screen instructions (some phones require one or two
reboot).

with Test Point:
1. Training: Connect phone in Flash mode (Hold the back (or the
Volume down in new 2012+ phones)) key and connect the USB cable.
2. Install drivers (x64 or x86)
3. Check if driver install ok
4. Disconnect phone
5. Connect the Test Point.
6. Install Drivers (x64 or x86 - according your system OS)
7. Keep the Test Point connected
8. Click Unlock
9. Stand by.
9a. Longer in description faster in process about 20 seconds.

Here some test logins users for

User login: ZKIZSTXW password : UKAOXTWB

User login: LWAIOJFK password : PBXAUIED

User login: UUKNTEBV password : FXSBHTIP

User login: OTVRLCSP password : FYJQVXBL

User login: GXUDIJHG password : VECRRDDW

User login: TIMBMMRS password : BUIVVKAI


User login: VGVKZFGE password : LPVHZAYB

User login: VNXNKZYT password : FBBNAMLL

User login: DUVKITWO password : BHQXRKSA

User login: WGZHMMXW password : HBEXDSEY

BlackBerry®last version Flash

BlackBerry®last version Flash

Symphony D25 Flash File (Another Version Info-5)

Symphony D25 (MStar)








Info - 05

Flash_Name = NUMONYX_M58LR128KCv

Flash Size = 0x1000000(16MB)

Password : Ashfaq Tawhid Rayan



Android gingerbread 2.3.1 on Nokia N900 step by step installation guide

Android gingerbread 2.3.1 on Nokia N900 step by step installation guide A step-by-step Android installation guide for Nokia N900 Users
Things you will Need:
1: Your nokia n900
2: Any Micro SD card (i used a 2GB)
---------------------
For this installation you need to Enable all repositories from App Manager (you need to input those information manually and be precise):
The configuration below is for N900 up to firmware PR 1.1.1:
Application manager --> Application catalogs --> New
Catalog name: maemo.org
Web address: Index of /extras
Distribution: fremantle
Components: free non-free
----------------------
The configuration below is for N900 for firmware PR 1.2:
Application manager --> Application catalogs --> New
Catalog name: maemo.org
Web address: Index of /extras
Distribution: fremantle-1.2
Components: free non-free
-----------------------
The configuration below is for N900 for firmware PR 1.3:
Application manager --> Application catalogs --> New
Catalog name: maemo.org
Web address: Index of /extras
Distribution: fremantle-1.3
Components: free non-free
------------------------
Second step :Install rootsh from app manager or from this site : maemo.org - Downloads: Rootsh
-------------------------
Third step we will use X-terminal (here get your fingers ready :P )
basic commands used : root( to give root access) ls (list files in a folder or directory) mkdir (create directory) rmdir (removes directory this command is specially used if you Used any NITDroid before and created AND directory in the root of the phone) Ok lets get started Type in X-terminal :

root

apt-get update (to download packages needed make sure you are connected to internet )

apt-get install nitdroid-installer

y

y
(if its asks again)

-------------------------------------
After this you have to download two files on your PC:
1st file : http://downloads.nitdroid.com/e-yes/gingerbread.tar.bz2
2nd file: http://downloads.nitdroid.com/nitins...nal1_armel.deb
-------------------------------------
Once you downloaded those files make sure you copy them to the root phone memory ( once you connect it to the pc tap the mass storage mode and just copy them to the phone memory for example lets say its H: just open H: and copy it there)or for other users they can copy it anywhere as long as they put the path correctly
--------------------------------------
After you have successfully copied the files open the x-terminal and typeNOTE:be precise and take care for space)

root

cd /home/user/MyDocs (cd(space)/home/user/MyDocs)

bzip2 -d gingerbread.tar.bz2 (bzip2(space)-d(space)gingerbread.tar.bz2) WAIT

cd /home (cd(space)/home)

mkdir /and (mkdir(space)/and)

cd / (cd(space)/)

mount /home /and (mount(space)/home(space)/and)

cd /and (cd(space/and)

tar xvf /home/user/MyDocs/gingerbread.tar (tar(space)xvf(space)/home.......or the path you put the file in

dpkg -i /home/user/MyDocs/nitdroid-kernel-2.6.28-06_final1_armel.deb (write this one like this as it here with all spaces / _ . -
-----------------------------------------------------------
Now You have to install two more updates to Patch some Bugs in the OS.
First Is Codec Update:http://downloads.nitdroid.com/e-yes/...pdate1.tar.bz2
second VOIP update :http://downloads.nitdroid.com/e-yes/...pdate2.tar.bz2
copy both files in directory like the before 2 files
------------------------------------------------------------
After downloading both the files Again open X-terminal and type

root

mount /home /and

cd /home/user/MyDocs

bzip2 -d gingerbread_update1.tar.bz2

cd /and

tar xvf /home/user/MyDocs/gingerbread_update2.tar


Make sure you install the updates correctly.
-------------------------------------------------
After the updates are installed you are done Installing Android Gingerbread On your Nokia n900 . just slide open your keyboard and reboot your phone. you will get a Dual Boot Option screen Select Nitdroid And Unleash the Gingerbread Power.

Nokia N97 32GB Mass memory solution by ashad


Nokia E75 vibrator solution.


Nokia E75 usb not detected solution.


Nokia E75 simcard not accepted solution.


Nokia E75 ringer solution.


Nokia E75 network solution.


Nokia E75 mic solution.


Nokia E75 local mode test mode solution and charging not support solution


Nokia E75 lcd light solution.


Nokia E75 keypad solution.


Nokia E75 handsfree solution.


Nokia E75 flash light solution.


Nokia E75 charging no response.


Nokia E75 camera solution.


Nokia E75 bluetooth solution.


Nokia E71 usb not detracted solution.


Nokia E71 ringer solution.


Nokia E71 keypad solution....


Nokia E71 handsfree not detected and handsfee mode solution


Nokia E71 fake charging and charging not save solution


Nokia E71 charging no response.


Nokia E71 bluetooth solution.


All Gsm Solution Headline Animator

Followers